Party Decor

Man this is really late as baby is now 14 months old but you know the old saying "Better late than never."

So here is the decor minus two banners from my son's first birthday. I was just so busy I wasn't able to take all the photos I would have liked but I have the memories of being with my son that matter. So without further ado here is what I made.

Cupcake Toppers:
These toppers were pieced by hand. Honestly I don't know why I do that to myself but you do what you have to for your child. Since I went with a pool/beach ball theme I matched the toppers to it. I really like the way they came out and thanks to my Cricut Explore Air I didn't have to hand cut all the pieces. Yay!

High Chair Banner:
I gave you all a sneak peek of the high chair banner awhile back but here it is in action. Again my Cricut was used to cut the center banner and number one and I went on pinterest for a tutorial of how to make the tissue paper tassels.

Banner:
This was one of 3 banners I made which I believe I may have shown the party banner. If not it is on my Instagram. The only banner I did not get a photo off was one that said "Happy Birthday (son's name)". It was a simple banner on a round backing but it came out nice nonetheless. This last banner was also used for my son's cake smash photos. Once again all pieces were cut with my Cricut.

Apologies

I've said it before and I'll say it again: I'm horrible at keeping up to date with my blog.

My tendonitis has subsided (thank God!) but I haven't really found too much time to craft just yet. One main reason is that most of my craft stuff is no longer in one spot. When we were preparing for my son to arrive we had to turn our spare bedroom in to his nursery. This required us to move almost all items out of that room. Almost all of my craft supplies was moved out. I say almost because I kept half of the closet. I have my paper rack nestled in there and a few other things but the bulk of my supplies is now in other parts of the house. My Cricut Explore Air also remained in the nursery.

My craft desk for example is now in our bedroom and hubby is using it. It's smaller as it has a lift side so it was the better choice for him to use while the crib is in our room. That being said, his desk was left in the nursery and I have to use that one if I want to craft. My desk holds most of my cardstock as well as glue, stamps, Tim Holtz embellishments, etc. Since my desk can't hold all of my cardstock and some patterned papers those are in our linen closet along with some other stamps, embellishments and my Bind-It-All. To finish off the supplies the last of it is in our closet stacked on some shelves. This includes: flowers, die cut pieces, chipboard, bling, and most of my scraps.

So for me to get any decent scrapbooking done I really have to sit and think about what I want to create, gather as much of the supplies I need, then go into the nursery to work on it. FYI, baby doesn't sleep in his nursery yet since the crib is still in our room. That's fine since we will eventually transfer him. Most of the time by the time I gather the items it is getting too late to create. So I will start something then have to clean it all up and put it away until I can get in there again. I can't leave the items out as my son is now tall enough to reach up to the desk and pull things off it.

So that's why you haven't seen me that much. I told you at the beginning this would be hard for me. And I will try to keep posting as much as I can but I may have to change the direction of my posting. As much as I love crafting at this time since I have a baby/toddler (he's not a toddler in my eyes yet!) I want to start posting maybe a few reviews on products or suggestions for baby items. We shall see. Again no promises because I can't always find time to sit and type.

Well that's all for now as I can hear baby stirring and will most likely wake up to nurse again soon. Until next time.

More party decor

So I'm about 5 weeks out until my son's birthday.  Eek! I seriously can't believe he's going to be 1. I don't want him to grow up but he is and I'm happy and sad.  So because the big day is coming I've been a busy mommy and working on decorations for his birthday.  The theme is pool party but I've been primarily focusing on a beach ball for most of the decor. 

Right now I'm working on his high chair banner so I discovered how to make tissue paper tassels.  Now I could post directions on here but to be honest you can just find them on Pinterest. That's what I did.  I didn't want to spend the money on a fabric panner because I know it's going to get dirty.  And I probably won't use the banner again. Plus,  this was cheaper. Since we are a one income family I have to find ways to cut costs and I already had the tissue!

The main focus of the banner is the 1 sign and that is made from cardstock I had on hand.  Again I need to save money as much as I can so I went with primary colors to make his decorations. I'm loving it all. And though the day will bring tears to my eyes they will be sad and happy tears. 

Commencing Party Decor

So it's coming down to my son's first birthday. I have about 8 weeks before the big day and it is bringing me both tears and a smile to my face. As I'm overly ecstatic my son is turning one I can't help but be saddened that my baby is no longer going to be a baby anymore. Where did the year go?

With that though I am enjoying planning his birthday party. We aren't breaking the bank on this but I could not pass up an opportunity to create something for my little guy. The theme is pool party/beach balls so I will be creating a few banners and some decor for it. It is an outside event so I can't do too much. The one item I am most excited to create though is the high chair banner. It will be the centerpiece of everything.

Pinterest has given me a few ideas but I always like to give my own twist to everything I see. Also, I have TONS of paper so I really don't want to go out and buy more but try and use what I have. That's going to be the challenge for me: use what you have. I have lots of color and always tend to stock up on cardstock when it is on sale so I don't think I will have a problem. I'm also focusing on primary colors so it should be easy peasy!

With his first birthday coming there is going to be a few more firsts we will cross before we get to the actual event. One is his first haircut. Baby boy was born with a head full of hair and some did fall but he kept most of it. The top part has gotten so long it covers his eyes and ears. We also may see some first steps by the time he turns one. He's been trying to stand all by himself and loves to use his standing walker. We also might get a first word (besides mama and dada) since he has been a vocal machine lately.

I'm loving everything that has happened leading up to this and honestly I'm an excited mama to celebrate his birthday. But if I'm really being honest, I might cry a little. And who can blame me?

Tendonitis

The title says it all. I had read that postpartum there were a few things a mother could develop or experience and I've managed to get a few. The biggest downfall (besides the hair loss) has been getting De Quervian's Tendonitis or Mommy Thumb. I've previously been diagnosed with tendonitis in my left wrist but have had the pain double since giving birth. And it is in both wrists now. Some days are better than others but it has become increasingly difficult to type. Even playing a simple swiping game makes my wrists sore. And forget trying to scratch my back. The tendon usually tightens and pops when I reach back or turn my wrist a certain way. It sounds painful and to be honest it is. So I'm going to keep this post short or I'll be paying for it tomorrow. Hopefully I'll be back soon.

Happy International Scrapbooking Day!

Today is the day we celebrate our love and passion for our hobby (and to snag a few discounts from some of our favorite scrapbook companies!). I had hoped to be able to participate in some challenges from other blogs but when you have a 9 month old who is teething and very clingy you can barely use the restroom by yourself. The little guy is in bed so that's why I am able to write this post. I am going to make it quick as there are still a few hours left of iNSD left and if I can get a layout or 2 out I will be happy.

If you want an up to date on what I'm crafting on then I do highly recommend following my Instagram. I also try and post Cricut tips and just show you what I'm working on. Well off to craft my lovelies! Hope you all got a chance to be crafty too!

Worst Mommy Part 2

So I had another "worst mommy" moment last night. Around 3:30 am my son fell off the bed. I quickly shot up at his cries as hubby scooped him up to comfort him. I was dead asleep and so was my son. Hubby was up playing video games.  Now I know you're probably thinking that I should've learned my lesson from before but my son has developed the habit of when he wakes up (even half a wake up) he sits up. It's pretty funny when I feel him move and watch him as he barely has his eyes open and then just kind of plops back down. I think, and I'm not certain since I was sleeping, he groggily sat up but was too close to the edge and fell. He's okay and cried for a bit but no major or minor injuries.

Now a few others may be wondering why he is in our bed. We bedshare/co-sleep/breast sleep or whatever you want to call it. It works for us since he is 99% breastfed and this mommy needs her sleep to stay sane during the day. Now this works for us and honestly I'm not interested in hearing that it could be dangerous and all that negative stuff. This blog is not to lecture anyone on my way of parenting or even to influence others to do what I do. This is just a way for me to share my experiences and crafts with you. Well, the one person who pops in to read. THANK YOU!

That being said I feel horrible that he fell and am now looking in to purchasing bed rails as well as trying to get him to sleep in his crib. Well stay in his crib after I've put him in there. He always starts off in his crib but by 12 or 1 am I am too tired to even try to get him back in it. Truthfully he wakes up to eat and I fall asleep feeding him. So him being in our bed works. At least so this mama doesn't get addicted to caffeine. Again.

Seeking my passion again

It has happened. After 9 months I have finally found the time to craft again! Cue the confetti canons and make some noise! I have been trying to get to this point since my little guy was born and because of constant feedings, sleep regressions, teething and trying to get housework done I had not had the time to create. And I mean really create. I might have done a quick card here or made a quick cut out but nothing big. Now I"m finally getting stuff done!

One thing that is really helping me is that Cricut finally released their Design Space app for android! More confetti! We android users have been waiting for this day for a long time. Now it is till in Beta form but some of the recent updates have made it easier to create. And I have been a designing while I'm nursing or laying in bed with hubby and baby. I've even cut a few things straight from my phone! Completely ecstatic about this. I can't wait for the full version where I can expand my designs even more but until then I can at least start a project on my phone and finish it on the computer after baby goes to bed. So much easier and quicker this way.

So let me tell you what I've been working on. I started an Instagram page solely for my crafts. You can see a preview on the right side of this blog. And if you'd like, you can follow me! My new obsession has been vinyl. I LOVE making wall clings or even personalizing some items for my son and nephew. Now that doesn't mean I've completely abandoned traditional scrapbooking I just haven't had the time. Until now! My first project is going to be my son's scrapbook. I have been taking his hand and footprint every month (which reminds me that I have to do this month) and took advantage recently of Shutterfly's free prints. I had previously printed out a few photos when he was 2 months but needed more photos. So on nights like tonight I will be scrapbooking my little heart out. Oh and writing a blog post here and there too.

So I'm off! The adhesive and cardstock is calling! I'll write to you all later!

My Return

I knew I wouldn't be able to handle a blog. I even said that in my very first post. BUT now that I have gotten the little one on a semi routine I think I can handle writing more consistently. Now I'm not guaranteeing a daily post but at least 1 or 2 a week. I think that's pretty good for a mama. So let me bring you up to speed.

My luvbug is almost 9 months old and I'm planning his first birthday. I can't believe it's been almost a year since I gave birth to him. It makes me sad and happy all at once. He is refusing to crawl as he prefers to stand and will most likely walk before he crawls. He's not sleeping through the night and honestly I'm not rushing him. I love the cuddles we get and enjoy nursing him. He's got 4 teeth with 2 more on the way. Teething is a bitch. Sorry for the swear word but it's been hard on all of us. We took family photos and although I have horrible post partum hair loss and growth they came out pretty damn good. Photoshop really made me look presentable. Hubby and I are planning a trip to visit family in the summer as well. So that's about it

On the crafty side I have really been loving using vinyl. I've been personalizing anything I can! Cricut also finally launched and updated their android app so I can design while my love naps. Only downside to the app is it's still very limited so I'm only using basic images or text. Which for vinyl is not a problem for me. I also have established an Instagram account dedicated solely to my crafting. I used to post on my personal but since I love posting photos of my sweet angel I didn't want to have it mixed in with my crafts. So give me a follow if you like. You can find it at @hmwlbynatalie.

So that's about it for now. I will do my best to include more mommy posts and crafts are coming as I can't throw a party without making something for it. I'll update soon!

Vinyl crafts

I know I've been slacking on the crafting posts and honestly I knew that would happen. It's the whole reason I made this blog, to talk about my lack of crafting. The title of the blog may throw you off a little but it speaks the truth. I'm an ordinary mama who loves to craft. That being said I don't always have the opportunity to let out my creative juices. Being a mama and wife take priority. I will however do my best to give any crafty tips and will post any projects I do get a chance to create. So on to this post.

Vinyl, oh beautiful vinyl. I have found a new expense in my crafty journey and it is vinyl. I made my first vinyl project over a year ago and I got hooked. However I didn't get a chance to do much more with it. This past year though I have made 3 projects so far.

Heat Transfer

Heat transfer vinyl is very easy to use. Placement on the material is also fairly easy. One thing to remember when cutting your heat transfer vinyl is to have the image or wording be a mirror image. I made that mistake when cutting out the big cousin shirt. Luckily I had enough vinyl to complete the project.

So I use my Cricut and Cricut Design Space to make my images. CDS does have a feature that allows you to choose the mirror image option so you don't mess up. I forgot about that feature in my hurry. If you purchase quality heat vinyl (I got mine from bogovinyl.com) the cut will be easy and so will placement. There are tons of videos on YouTube to tell you how to cut and place heat vinyl so I will just give you a quick rundown.

1. Create image in your cutting program.
2. Size the image 
3. Place heat transfer vinyl shinny/plastic side down on mat
4. Load mat to machine
5. Set blade to vinyl or a low depth. You want to cut through the vinyl but not the plastic
6. Press cut
7. Remove mat from machine
8. Remove excess vinyl and weed out any small pieces
9. Place vinyl on material, plastic side down
10. Iron following vinyl recommended heat setting for iron. This may vary. I also don't iron directly on the vinyl but add a small piece of cloth (pillow case) on top of the image I'm going to iron on. 
11. Slowly peel up plastic. This may take a few times as you need to make sure the vinyl gets ironed on properly.

And that's it. Make sure to follow washing instruction for your vinyl. My vinyl was recommended to wash the item inside out

Cling Vinyl

Sorry for the low light photo but this was the largest cling vinyl I did. It was really easy and honestly I loved making it! Now this vinyl is Oracal 631 and it is a matte and removable/indoor vinyl. There is Oracal 651 that is a glossy and permanent/outdoor vinyl but I have yet to use it. I went with removable because I knew in the future this vinyl would be removed/replaced. Again I purchase my vinyl from bogovinyl.com and I can honestly say the quality is amazing.

One of the things to remember with cling vinyl is to always use transfer paper to transfer your image. BUT make sure it is good quality transfer paper. I had purchased some transfer paper from Michael's Recollection brand and it almost ruined my cut. I was pissed. Luckily I had some quality transfer paper from Bogo Vinyl so my cut was saved.

The steps are fairly easy to make cling vinyl. They are very similar to the heat transfer except you are not doing a mirror image. Here are the steps:

1. Again, you want to place the vinyl shiny/plastic side down. 
2. Set your machine to vinyl or a low depth then cut. 
3. Weed out the excess and place your transfer paper over the image. 
4. With a bone folder or scrapper tool or anything that you can rub, rub over the transfer tape to add the image to it. This can take a few tries
5. Align image to surface
6. Rub with bone folder or other tool you used
7. Slowly peel away

And that's it! Layering is very easy as you just put one vinyl color on top of the other. I hope you guys enjoyed this post. I have more crafty things coming just need to find the time.